招标项目
Project Name: The East China Sea Xihu Oil & Gas Operating Company
Project：DRY GAS COMPRESSOR（Name of Goods）
招标编号（Bid No.）：0704-2340JDCP0418
日 期：2023年4月7日
Date : April 7th. , 2023
中化建国际 （以下称为“招标代理机构”）受中海石油（中国）东海西湖石油天然气作业公司（以下称为“招标人”）委托，就东海西湖石油天然气作业公司干气压缩机进行国际公开招标。现邀请投标人对下列货物和服务提交密封投标：
CNCCC International Tendering Co., Ltd. (hereinafter referred to as “the Tendering Agent”), entrusted by The East China Sea Xihu Oil & Gas Operating Company (hereinafter referred to as “Tenderee” ), intends to purchase the Goods and the relevant services required under the project of DRY GAS COMPRESSOR by International Competitive Bidding. Bidders are kindly requested to provide the following Goods and services with sealed bids.
1. 招标条件
Bidding Conditions：
项目概况：招标人购买3套干气压缩机。
Project Summary：3 sets of DRY GAS COMPRESSOR will be acquired by the Tenderee.
资金到位或资金来源落实情况：已落实。
Source of Funds: Yes
项目已具备招标条件的说明：已具备。
Description of Prepared Bidding Conditions: Yes
2. 招标内容：Bidding Contents:
货物
Name of Goods: DRY GAS COMPRESSOR
数量：3 套
Quantity: 3 sets
主要技术规格：
Main Specifications:
电机驱动离心压缩机安装在ZZ平台上甲板，电机采用变频驱动，变频器安装在下甲板专用房间。每台压缩机规格：流量不低于671.5╳104Sm3/d（入口压力8000-9800kPaG 42℃,出口压力：10300-18550kPaG 56-115℃）。
The centrifugal compressor driven by motor is installed on the upper deck of ZZ platform, the motor is driven by Variable frequency, and the VFD is installed in the special room on the lower deck. The specifications of each compressor: Flow rate is no less than 671.5╳104Sm3/d (inlet pressure 8000-9800kPaG 42℃, outlet pressure: 10300-18550kPaG 56-115℃).
交货期：
Delivery Schedule:
从中华人民共和国关境内提供的货物：合同签订后34周（货到项目现场时间，地点为浙江舟山或其他买方指定地点）
For goods offered from within PRC customs territory: 34 weeks after signing the contract . (arrival date to Zhoushan, Zhejiang (From within PRC ) or other designated places.
从中华人民共和国关境外提供的货物: 合同签订后34周（DAP 抵达宁波港或买方指定的中国其他港口）
For goods offered from outside PRC customs territory: 34 weeks after signing the contract . (DAP arrives at Ningbo or other designated places Seaport)
3. 对投标人的资格和业绩要求：
Requirements for Qualification and reference of Bidder:
（1）资格要求
Requirements for Qualification of Bidder
A．如果投标人为境内注册公司，投标人需提供合法有效的企业法人营业执照、税务登记证及组织机构代码证或证照合一的营业执照；
如果投标人为境外注册公司，需提供有效的公司登记注册证明；
A．The bidder within the customs territory shall provide valid independent legal person business license, tax registration certificate, organization code certificate, or combined certificate and business license;
The bidder outside the customs territory shall provide valid certificate to prove valid business registration certificate.
B. 压缩机本体制造商应通过ISO9001（或GB/T19001）质量体系认证。成撬商投标时，其压缩机本体制造商和成撬商均应通过ISO9001（或GB/T19001）质量体系认证。投标人须提供有效的质量体系认证证书；
B. The manufacturer of the compressor shall pass Quality Management System Certification ISO9001（or GB/T19001）Certification. If the bidder is the authorized skid assembly of the unit, the manufacturer of the compressor and the skid assembly shall both pass Quality Management System Certification ISO9001（or GB/T19001）Certification. Bidder shall provide valid Certificate of Quality Management System Certifications.
C. 投标人应为电驱天然气离心压缩机本体的制造商或离心压缩机本体制造商授权的成橇商。本次招标不接受代理商投标。
C. The bidder should be the manufacturer of gas centrifugal compressor driven by the motor or the skid assembly of the unit authorized by the manufacturer of gas centrifugal compressor driven by the motor . Bid by agent is not accepted.skid assembly of the unit.
D. 是否接受联合体投标：否
D. Joint Venture: Not Accepted
E. 未领购招标文件是否可以参加投标:不可以
E. Bid without the bidding documents：NOT Available
（2）业绩要求Requirement for Bidder's reference:
A. 投标人所投电驱天然气离心压缩机本体的制造商应自2013年1月1日至投标截止日（以合同签订日期为准）至少具有一项石油石化项目电机驱动的天然气离心压缩机本体供货业绩，该业绩中配套的电机功率应≥9.2MW、处理量应≥738万方/天和出口压力≥18550kPaG，并提供相关业绩证明。投标人须提供新的未使用过设备，新试制产品不予接受。
A. The manufacturer of the natural gas centrifugal compressor body driven by the motor supplied by the bidder shall have at least one supply performance of the natural gas centrifugal compressor body driven by the motor in the petroleum and petrochemical project from January 1, 2013 to the deadline for submission of bids (the date of contract signing), in which the matched motor power shall be ≥ 9.2MW, the processing capacity shall be ≥ 7.38 million m3/d and the outlet pressure shall be ≥ 18550kPaG, and provide relevant performance certificates. The Bidder must provide the new unused equipment, and the new trial products will not be accepted.
B. If the Bidder is the authorized skid assembly of the unit, in addition to meeting performance A requirements, from January 1, 2013 to the deadline for submission of bids (the date of contract signing), the Bidder shall have at least one set of electric drive natural gas centrifugal compressor (power ≥ 9.2MW) skid performance, and the Bidder shall provide proof documents of skid performance in the bidding documents.
以上业绩要求，标人须按规定格式提交业绩表，并提交相关业绩证明文件。业绩证明文件包括但不限于：1）销售合同复印件（含相关技术附件）和2）到货验收材料。投标人所提交的业绩证明文件必须至少体现以下内容：合同签署时间、制造商名称、货物名称、项目名称、电机功率、处理量、出口压力及到货验收材料。未提交业绩证明文件，或所提供的业绩证明文件无法体现合同签署时间、制造商名称、货物名称、项目名称、电机功率、处理量、出口压力及到货验收材料的，均视为无效业绩。
The Bidder shall furnish reference List in given form for the above-mentioned Requirement for Bidder's reference, and provide corresponding documentary evidence. The documentary evidence shall include but not limited to: 1) copies of sales contract (including technical appendix) and 2) Receiving certificate of arrival of goods. The reference evidence certification furnished by Bidder shall as least demonstrate the content show as follows: Date of signing contract, name of manufacturer, name of Goods, name of project, motor power, processing capacity, outlet pressure and Arrival acceptance materials.If no documentary evidence furnished, or documentary evidence furnished can not demonstrate Date of signing Contract, name of manufacturer, name of Goods, name of project, motor power, processing capacity, outlet pressure and receiving certificate of arrival of goods, the relevant reference will be deemed invalid.
4. 有兴趣的投标人可通过以下方式获取招标文件：从2023年4月7日开始至2023年4月14日止，请登录中国海油采办业务管理与交易系统(评标办法-最低价.pdf
